Marine

If you are considering a complete re-wire of your boat or are simply looking to install a marine radio or maybe have your trailer wired correctly, look no further.

At Koan Solutions we offer a range of accessories that includes a selection of smaller, but still extremely important products to ensure that your electronics are reliable and ensure that you are prepared for your next adventure.

We not only supply the product – our team of technicians will expertly install the product.

Our aim is to ensure the reliability of the electronics during that short time you have on the water.

The range includes (but not limited to) a range of spot lights & deck lights, communication equipment, navigation devices, tyre monitoring accessories for your trailer and much more…

Koan Solutions Adelaide Automotive Accessories (8)
Koan Solutions Adelaide Automotive Accessories (6)
Koan Solutions Adelaide Automotive Accessories (7)
Koan Solutions Adelaide Automotive Accessories (4)
Koan Solutions Adelaide Automotive Accessories (3)
Koan Solutions Adelaide Automotive Accessories (5)
Koan Solutions Adelaide Automotive Accessories (2)
Koan Solutions Adelaide Automotive Accessories (9)
Koan Solutions Adelaide Automotive Accessories (1)

SAV Winch – South Australia

Koan Solutions Adelaide Automotive Accessories 6572 (2)

The Savwinch Classic Series has been around for over 10 years now and is the highest quality drum anchor winch worldwide. Having been installed on thousands of boats including charters, coast guard vessels, private users boats, and even boats seen on popular fishing shows, there are many happy Savwinch users out on the water.

In 2016 Savwinch have released their brand new Signature “Stainless Steel Motor” series. Designed locally and made exclusively for Savwinch. These are 316 Stainless Steel motors, not just a cover. They have 20% more power and speed. Machined to fine tolerances and utilising O ring seals, the SS motors are completely submersible without the use of sealants or glues. No more concerns about water ingress or corrosion.

Australian made drum style electric boat anchor winches:

  • Australian engineered motors
  • Oversized gearbox worm drive fully sealed (maintenance free for life)
  • 316 Stainless steel drum with solid keyed shaft
  • Fully sealed Motor (IP68 12V/24V) with external gland no terminals on motor (corrosion resistant)
  • Low noise, won’t scare off fish
  • Stainless Bearing hub and Bearing support
  • Comes with Circuit breaker, solenoid, and forward and reversing switch
  • Motor/gearbox has 8 different degree mounting points to drum bracket
  • No gap between the bracket and the drum so your rope cannot fall between and jam up
  • The anchor is lowered and raised through the flick of a switch and locks into position once switch is disengaged

We are proud to have the worlds first electronic Fast Fall system, with a patented world winning design which is Australian manufactured. It is mechanical clutch free, which increases the speed of the motor on the way down, comparably as fast as you can freely drop your anchor. Other winch brands go up just as fast as they go down, this draws more current which could lead to overloads, battery drainage, and winch failure. Regardless the Savwinch Fast Fall system drops significantly faster than a fixed speed winch.

SAV Fast Fall System

We are proud to have the worlds first electronic Fast Fall system, with a patented world winning design which is Australian manufactured. It is mechanical clutch free, which increases the speed of the motor on the way down, comparably as fast as you can freely drop your anchor. Other winch brands go up just as fast as they go down, this draws more current which could lead to overloads, battery drainage, and winch failure. Regardless the Savwinch Fast Fall system drops significantly faster than a fixed speed winch.

SAV Winch Warranty

We know our products can withstand the test of time, so for the first time ever, our brand new Signature Series come with an included comprehensive 7 year warranty!

Savwinch are the first and only company to offer such an extensive warranty. We believe a premium product should include a premium warranty. All of our Classic Series Winches and our Electronic Fast Fall Systems come with an included comprehensive 5 year warranty. All warranty repairs and concerns are dealt with in house at our head office.

All warranty claims are reliant on proof of purchase. For all warranty claims, please complete the below form and send it back to us. Upon receiving your warranty claim form, a Savwinch representative will be in contact to discuss your warranty claim.

KOAN WINCH INSTALLATIONS

YALTA 1750  DAY CRUISER

This 1750 Yalta required not only a bulkhead but also a new anchor enclosed tub. The existing fibreglass tub was not accepting of the winch due to its size nor was it ever going to be strong enough for the 1000SS SAV Winch. The challenge here was to cut the existing small bulkhead and deepen the tub whilst keeping the original look in the cabin. A visible drum winch was not going to be attractive sitting on top of this deck. The winch being out of site met not only with this client’s requirements but ensured it was functional, strong and the result was not a tack on.

STABICRAFT

This 1550 Stabicraft Fisher accepted the 880CS SAV Winch with ease. The only tricky area to consider was the rope and chain exit given the limited room up the front. As you can see in the photos below some careful modifications to the original Stabicraft tie down point, (without loosing it completely) and the winch roller made for a neat finish particularly given that a rod holder was also fitted.

Stabicraft-1550-16-e1505624213175-768x1024
Stabicraft-1550-16-e1505624213175-768x1024
Stabicraft-1550-9-e1505624011428-768x1024
Stabicraft-1550-13-1024x768
Stabicraft-1550-5-1024x768
Stabicraft-1550-6-1024x768
Stabicraft-1550-2-e1505624170217-768x1024
Stabicraft-ANCHOR-3-e1505624193547-768x1024
Stabicraft-1550-8-e1505624234483-768x1024
Stabicraft-1550-1-1024x527

WHITTLEY MONTERAY

This boat required a bulkhead, as the fibreglass tub was not going to provide the strength required to accept the 1000SS SAV Winch. The challenge here was to dismantle the winch and assemble it inside the mounting area and also to build a bulk head with enough area to accept the winch and also to keep the original look in the cabin. A visible drum winch not going to be attractive sitting on top of this deck, the winch being out of site met not only with this clients requirements but kept the original appearance / design in tact.

 

150717-Whitley-Monteray-11-1024x768
150717-Whitley-Monteray-8-1024x768
150717-Whitley-Monteray-12-1024x768
150717-Whitley-Monteray-22-1024x768
150717-Whitley-Monteray-19-1024x768
150717-Whitley-Monteray-18-1024x768
150717-Whitley-Monteray-28-1024x768
150717-Whitley-Monteray-27-1024x768
150717-Whitley-Monteray-23-1024x768

TROPHY

This boats bulkhead had all the strength required and made for a mounting solution that required little in terms of modification. The challenge here was to dismantle the winch and assemble it inside the mounting area. The entry point was not accepting of an assembled winch. A visible drum winch is not always attractive sitting on top of the deck, being out of site met with this clients requirements, after all it is a good looking vessel.

Koan Solutions (1)
Koan Solutions (3)
Koan Solutions (6)
Koan Solutions (2)
Koan Solutions (5)
Koan Solutions (4)

SWIFTCRAFT

We have transformed this Anchor well that was in obvious need of not only repair but also some added strength. Custom repair included, grinding, plate installation, marine ply insert, fibre glassing and also a flow coat finish. Call in and let us asses and provide the best advice for your boat.

SEAFARER 5.5

This boat bulkhead had all the strength required and made for a mounting solution that required little in terms of modification. Sikaflex and Gelcoat was used in those areas that required to be sealed. Again ask us to asses and provide the best advice for your boat.

Gelcoat Repairs

A Gelcoat repair was also completed whilst we completed the winch installation, many other services are offered, simply call us on 1300 486 341 or drop in for some advice and suggestions for your boat.

Fibreglass Projects

If you have an old loved boat that you wish to bring back to it’s original new condition or have always wanted some improvements to enhance the original design then look no further. If you contact us we have the perfect example of such a boat in our workshop right now.

Accessories

 

Saltwater Series Trailers

Saltwater Boat Trailers are Packed with Features:

  • Marine grade aluminium I-beam chasis bolted together using stainless steel bolts.
  • Weld-free prevents cracking or rusting.
  • Stainless steel hydraulic disk brakes including heavy duty disc rotors and ceramic pads.
  • Torsion axles suspension.
  • Australian made ADR approved LED lights.
  • Heavy duty winch post and jockey wheel for strength and longevity.
  • Alloy wheels with load rated tyres.

Scroll to Top